Yonico 12338q Raised Panel Cabinet Door Router Bit Set with 3 Bit Ogee 1/4-Inch Shank

 

Yonico 12338q Raised Panel Cabinet Door Router Bit Set with 3 Bit Ogee 14-Inch Shank

Yonico 12338q Raised Panel Cabinet Door Router Bit Set with 3 Bit Ogee 1/4-Inch Shank

Yonico 12338q Raised Panel Cabinet Door Router Bit Set with 3 Bit Ogee 1/4-Inch Shank - The panel raiser can also be used to make attractive drawer fronts, table tops, plaques and moldings. The raised panel bit puts a classic ogee edge on the central panel of your door. Included in this set ogee raised panel bit, 2 bit matched ogee rail & stile, allen wrench plus extra spacers, solid wood storage case. Industrial quality router bits. Fully enclosed ball bearing guides allow for precise cuts without the use of a fence. Build-up and heat resistant teflon coating. Satisfaction guaranteed and lifetime warranty. Set comes in a solid wood storage case. Solid hardened steel bodies with anti-kickback design. C3 micro-grain tungsten carbide cutters. Build-up & heat resistant teflon coating.



Take a look at some similar products ...


 

Timberline TRS-130 Tongue and Groove Door Making Router Bit Set 3-Piece

Timberline TRS-130 Tongue and Groove Door Making Router Bit Set, 3-Piece

Timberline TRS-130 Tongue and Groove Door Making Router Bit Set, 3-Piece - Includes timberline and reg no190-24 1/2-inch diameter flush trim (1/2-inch cutting length) and no440-32 1-3/4-inch tongue and groove set includes two extra bearings no47708. 1/2-inch shank. Carbide tipped, professional quality. Timberline trs-130 3pc tongue &groove cabinet set. For 1/2-inch to 1-inch material. Custom-made hardwood storage case included.


 

YaeTek Matched Tongue and Groove V-Notch Router Bit Set 12-Inch Shank

YaeTek Matched Tongue and Groove V-Notch Router Bit Set 1/2-Inch Shank

YaeTek Matched Tongue and Groove V-Notch Router Bit Set 1/2-Inch Shank - Our bits are the preferred choice of professionals and hobbyists alike. C3 micro-grain tungsten carbide cutters. Satisfaction guaranteed and lifetime warranty. Precise, designer profiles create smooth and detailed cuts, perfect for projects of any level of complexity. Solid hardened steel bodies with anti-kickback design. Industrial quality router bits. Build-up & heat resistant teflon coating. (C3 grade carbide is the highest grade used in the router bit industry) the result is a highly durable bit that can be utilized for the most rigorous industrial applications. Our router bits are manufactured using solid hardened steel and c3 micro grain carbide.


 

EnPoint Woodworking Solid Carbide Top Ball Bearing Beading Router Bit 12 Shank 12 Radius Cutter 34 Cut Height Industrial Quality Rounding Over Fillet Ball Bearing Guide Edging Router Bit

EnPoint Woodworking Solid Carbide Top Ball Bearing Beading Router Bit 1/2″ Shank 1/2″ Radius Cutter 3/4″ Cut Height Industrial Quality Rounding Over Fillet Ball Bearing Guide Edging Router Bit

EnPoint Woodworking Solid Carbide Top Ball Bearing Beading Router Bit 1/2″ Shank 1/2″ Radius Cutter 3/4″ Cut Height Industrial Quality Rounding Over Fillet Ball Bearing Guide Edging Router Bit - Eliminate the time-consuming hand-filing that normally follows each laminate cutting job. Cutting a fillet, using a standard corner rounding bit, leaves a sharp edge on the laminate. 7mm) radius cutter 1/2 inch cutter diameter 1-1/2 inch (38. Cut a variety of materials from wood, plywood, mdf and other wood composites, plastics, and solid surface. This unique bit “breaks” the sharp edge of the laminate, as it cuts the fillet together with a quarter-round shape in one pass. Specifications product type top ball bearing beading router bit material carbide-tipped, teflon coating, high-speed steel shank extra strong, last extra long, a very good wear life shank diameter 1/2 inch (12. 1mm) cutter height 3/4 inch (19mm) overall length 2-37/64 inches (65. Cut a quarter-round shape bounded by fillets, known as a bead, is produced in one pass by this bit the width of one fillet is set by the pilot bearing size, while the other is controlled by the depth of cut. 4mm) application mainly used for cutting a variety of materials from wood, plywood, mdf and other wood composites, plastics, and solid surface etc.


 

Whiteside Router Bits 6000A Large Raised Panel Profile Bit with 3-38-Inch Large Diameter and 1-717-Inch Cutting Length

Whiteside Router Bits 6000A Large Raised Panel Profile Bit with 3-3/8-Inch Large Diameter and 1-7/17-Inch Cutting Length

Whiteside Router Bits 6000A Large Raised Panel Profile Bit with 3-3/8-Inch Large Diameter and 1-7/17-Inch Cutting Length - Precision ground for proper balance at high rpm. As always, whiteside machine is continuously striving to improve our product through new technology, improved production techniques, and ongoing research and development efforts along with rigid quality control, vital customer feedback and extensive field testing. Committed to quality. Made in usa. Whiteside’s quality, innovation, and customer commitment is still present in our superb product line, in the design of custom tooling to fill special customer requirements, and in the development of special machinery and tooling for our own manufacturing use. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Come on, give us a try. Whiteside machine company. Whiteside router bits are made with premium carbide. Manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Whiteside machine company was founded in 1970 as a general purpose machine shop in the basement of bill & bobbie whiteside’s home.


 

Freud 40-104 45 Degree Chamfer Bit with 14-Inch Shank

Freud 40-104 45 Degree Chamfer Bit with 1/4-Inch Shank

Freud 40-104 45 Degree Chamfer Bit with 1/4-Inch Shank - Easy to use. The product is 1-1/2″ chamfer bit. 1/2-inch carbide, 45-degree angle, 1/4-inch shank. Ground carbide with titanium for long life. Impervious to chemical attack. Easy to use. The product is manufactured in italy. Computer balanced for vibration free operation speeds over 22,000. Anti-kickback. The product is 1-1/2″ chamfer bit. The product is manufactured in china.




Maybe you need these also?


 

Makita 733121-0A 38-Inch Corner Rounding 2-Cutting Flutes Carbide Tip Router Bit 12-Inch Shank

Makita 733121-0A 3/8-Inch Corner Rounding 2-Cutting Flutes Carbide Tip Router Bit, 1/2-Inch Shank

Makita 733121-0A 3/8-Inch Corner Rounding 2-Cutting Flutes Carbide Tip Router Bit, 1/2-Inch Shank - Carbide tip with ball bearing pilot. Radius is 3/8-inch. 3/8″ corner rounding router bit 1/2″ shank. 1/2-inch shank. Replacement bearing 733132-4a. Overall length is 2-9/16-inch.


 

MLCS French Baroque Table Edge Router Bit 12 Shank

MLCS French Baroque Table Edge Router Bit 1/2″ Shank

MLCS French Baroque Table Edge Router Bit 1/2″ Shank - One edge or top and bottom edges can be molded depending on wood thickness. Additional profiles can be made by raising the top portion of bit above the wood. 1/2″ shank. Free shipping in the contiguous usa. Satisfaction guaranteed. You can create a unique style edge or duplicate a classic design. Bits are 2 flute, carbide-tipped with totally enclosed ball bearing guides. These bits are used to form a deep, decorative detail found on dining room, coffee or end tables, window sills, chair rails and china cabinets. Create a unique edge or duplicate a classic design. Decorative detail molding for table edges and more. Best results are obtained by making several light passes, increasing depth of cut with each pass.


 

Bosch 84508M 2-58 In x 1-316 In Carbide Tipped Lock Miter Joint Bit

Bosch 84508M 2-5/8 In. x 1-3/16 In. Carbide Tipped Lock Miter Joint Bit

Bosch 84508M 2-5/8 In. x 1-3/16 In. Carbide Tipped Lock Miter Joint Bit - Lock miter bit allows materials to join at 90° by cutting a 45° miter and a perfect matching tongue & groove glue joint. This joint not only increases mechanical strength, but also increases glue surface area and automatically aligns parts. Premium-quality micrograin carbide tips are ground on specialized cnc equipment for an extra-fine finish with maximum sharpness and edge retention. The fully hardened and tempered steel shank provides ultimate durability. Control cut design helps minimize kickback. Micrograin carbide tips provide superior wear resistance and long life. Recommended for use with a router table. Used for making right angle joints and glue joints.


 

Yonico 15334 Lock Miter 45-Degree Glue Joint Router Bits 12-Inch Shank Set of 3

Yonico 15334 Lock Miter 45-Degree Glue Joint Router Bits 1/2-Inch Shank, Set of 3

Yonico 15334 Lock Miter 45-Degree Glue Joint Router Bits 1/2-Inch Shank, Set of 3 - With fence in place, set the center of the stock to the center of the miter bit. Two flute carbide router bit cutters and 1/2″ shanks. When positioned properly, one mitre bit will cut both pieces of stock without having to adjust the bit. Satisfaction guaranteed & lifetime warranty. Build-up and heat resistant teflon coating. The largest miter lock bit has a 2-3/4″ diameter and is suited for up to 1″ thick stock. The medium sized lock miter router bit has a 2″ diameter and is suited for 3/4″ stock. The yonico 15334 lock miter bits set is reversible. C3 micro-grain tungsten carbide cutters. Set comes in a solid wood storage case. Build-up & heat resistant teflon coating.


 

EnPoint Woodworking Carbide-Tipped Beadboard Router Bit 14 Shank 1 Cutter Dia 58 inch Cutter Height Round Over Bit HSS High Speed Steel Trimming for Wood Plywood MDF Plastics

EnPoint Woodworking Carbide-Tipped Beadboard Router Bit 1/4″ Shank 1″ Cutter Dia 5/8 inch Cutter Height Round Over Bit HSS High Speed Steel Trimming for Wood Plywood MDF Plastics

EnPoint Woodworking Carbide-Tipped Beadboard Router Bit 1/4″ Shank 1″ Cutter Dia 5/8 inch Cutter Height Round Over Bit HSS High Speed Steel Trimming for Wood Plywood MDF Plastics - 4mm)  overall length 2-1/4 inches (57mm)  product type center point style  material carbide-tipped, teflon coating, high-speed steel shank  application mainly used for cutting a variety of materials from wood, plywood, mdf and other wood composites, plastics, and solid surface etc. Rout decorative and precisely grinding grooves will make your jobs smooth and clean with chips removal. Shank diameter 1/4 inch, cutter height 5/8 inch (16mm). Mainly used for cutting a variety of materials from wood, plywood, mdf and other wood composites, plastics, and solid surface etc. Carbide-tipped, teflon coating, high-speed steel shank, more hardened and sharpened, heat resistant, durable service and long lifespan. Feature 100% brand new and high quality, precision grinding and never use teflon coating and rout decorative grooves ensures your jobs smooth and clean out of chips carbide-tipped, high-speed steel shank, high hardness and efficiency, heat resistant, sharp, durable and long lifespan specification shank diameter 1/4 inch  cutter height 5/8 inch (16mm)  cutter diameter 1 inch (25. Cutter diameter 1 inch (254mm), overall length 2-1/4 inches (57mm).