INCRA Miter1000/HD Miter Gauge

 

INCRA Miter1000HD Miter Gauge

INCRA Miter1000/HD Miter Gauge

INCRA Miter1000/HD Miter Gauge - Heavy duty machined and laser cut components patented incremental flip shop stop for prefect cut length control. Please refer to incra. Six expansion disks adjust both sides of the bar for zero side play, low-friction travel on most table saws with standard miter gauge channels, including delta, craftsman, imports, etc. Patented glide lock miter bar expansion disks provide a perfect fit. The miter bar’s adjustment range accommodates actual slot widths between 0. Are you cutting parts for segmented turning the miter 1000hd will allow you to precisely set and quickly duplicate any angle you might need, whether it’s 18 degrees for cutting 10 sides, 25. The hd stands for high definition, because the protractor plate’s exclusive anglelock indexing system has a whopping 180 angle stops in 1degree increments with special stops located at 22. 1/10th-degree vernier cursor, telescoping fence expands from 18-inch to 31-inch overall length. Combine that high-resolution protractor with the industry’s smoothest adjustable miter bar, telescoping incralock cut-off fence & flip shop stop, steel vernier scale that reads to 1/10 degree, and you’ve got a winner that will improve the quality of any project. 740″ and 0. Com for fit chart before ordering.




You might consider similar Miter Saws …


Bosch CM12SD Dual Bevel Slide Miter Saw 12

Bosch CM12SD Dual Bevel Slide Miter Saw, 12″

Bosch CM12SD Dual Bevel Slide Miter Saw, 12″ - Bosch exclusive quick select turret bevel detent system offers common detents at 22. 5, 33. All-metal bevel lock lever located on bevel post for quick and easy bevel settings without reaching behind the saw. The bosch cm12sd has quick and easy bevel settings without the need to reach behind the saw. Adjustable front stabilizing foot maintains saw stability when performing slide cuts. Crown chop lock positions head in place for maximum chop cutting capacity for upright base molding and nested crown. Greater cutting capacity delivers more versatility because many times the user never knows what’s required in the next cut. Tall 4-3/4-inch fence design supports material for accurate cuts. Integrated base extensions extends material support up to 40 inch. 9, 45 and 47 degrees. The only compound miter saw available with integrated base extensions that support the work piece and make transportation easier.

DEWALT DWS779 12 Sliding Compound Miter Saw

DEWALT DWS779 12″ Sliding Compound Miter Saw

DEWALT DWS779 12″ Sliding Compound Miter Saw - Super efficient dust collection system captures over 75% of dust generated. This miter saw also offers an exclusive back fence design which cuts up to 2×16 dimensional lumber at 90° and 2×12 at 45°. Powerful 15 amp, 3,800 rpm motor delivers extended power and durability. The dewalt dws779 12″ sliding compound miter saw features a powerful 15 amp, 3,800 rpm motor that delivers extended power and durability. Exclusive back fence design cuts up to 2×16 dimensional lumber at 90° and 2×12 at 45°. Backed by dewalt’s 3 year limited warranty. It has a super efficient dust collection system that captures over 75% of dust generated.

Hitachi C8FSE 92-Amp 8-12-Inch Sliding Compound Miter Saw

Hitachi C8FSE 9.2-Amp 8-1/2-Inch Sliding Compound Miter Saw

Hitachi C8FSE 9.2-Amp 8-1/2-Inch Sliding Compound Miter Saw - Electronic speed control for consistent rpm while cutting for maximum control. Positive miter stops for quick adjustments to 15, 225, 316, and 45 degrees to the left and right. )17 height (in. Precise compound cuts with 48 degree bevel angle left and 5 degree bevel angle right. Adjustable pivot fence broadly supports work piece, such as crown molding lying flat, for improved stability while cutting. )36 table height from floor (in)36 maximum cut depth at 45° (in)2. Guides & instructions owner’s manualyes general features table materialdie cast aluminum table tilt range0-45 deg. Revolutionary compact slide system allows the saw head to slide along fixed rails, eliminating the need for rear clearance. )26 depth (in. Includes table saw, 24t carbide tipped blade, stand, blade wrenches, hex keys, anti-kickback pawls, blade guard assembly, push stick, miter gauge, rip fence and operator’s manual the craftsman 10 inch table saw has a sheer table top for smooth cuts every time potent 15 amp motor powers through tough materials cut after cut easy to adjust miter gauge gives you quick, accurate control for tight bevels and corners advanced guarding system delivers versatility and superior blade coverage in a safe package upper guarding assembly installs via clamp with latching action spreader easily repositions to lower riving knife position via a tool-free internal cam lever (lower riving knife position for non-thru cuts only) push button assembly makes the anti-kickback pawl easy to use and safe fence is quick release mounted for fast rip adjustment large 25″ x 17″ steel table top work surface support a variety of material big and small push stick table mount is quick to access and keep the worktop clutter free durable steel stand delivers a stable, comfortable working height large, flip on/off switch delivers fast access and quick control rack and pinion blade height control delivers smooth, accurate adjustment even on the fly setup some assembly required blade, use arbor size5/8 in. 5 maximum cut depth at 90° (in)3.

BlackDecker M1850BD 7-14 Compound Miter Saw

Black+Decker M1850BD 7-1/4″ Compound Miter Saw,

Black+Decker M1850BD 7-1/4″ Compound Miter Saw, - The 9. The black + decker 7-1/4″ compound offers a lightweight, portable saw that provides accurate cutting of trim, framing and craft projects. The saw has nine positive stops at the most used miter angles with a range of 0-45° left and right. Miter range 0-45° left and right, with nine positive stops. Use for trim, framing and craft projects. The saw head tilts to the left up to 45° for bevel and compound cut angles. 0 amp ball bearing motor provides the power to cut up to 2″ x 4″ (dimensional) at 90° and 2″ x 3″ (dimensional) at 45°. Idea for crown and base molding jobs. Idea for crown and base molding jobs around the house or jobsite. Compact, portable saw for cutting accuracy. Die-cast aluminum construction for an overall weight of under 17 pounds.

DEWALT DW716 15 Amp 12-Inch Double-Bevel Compound Miter Saw

DEWALT DW716 15 Amp 12-Inch Double-Bevel Compound Miter Saw

DEWALT DW716 15 Amp 12-Inch Double-Bevel Compound Miter Saw - The rage 3 sliding compound miter saw, comes with evolution’s 3 year limited warranty. Motor 1800w (soft start) amps 15 horsepower 2. Innovative gearbox and belt-drive design increases vertical cutting capacity. Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts. 150 amp, 3,600 rpm motor delivers extended power and durability. Precise miter system and machined base fence support optimize cutting accuracy. A full range of blades is also available (sold separately) to turn this saw into a sliding tile cutter and to allow for more specific metal cutting applications. Multipurpose cutting is coupled with useful features such as an in-line handle enabling right or left handed use, adjustable cutting depth for grooving, laser guidance system and robust outer casing enhancing durability. The product is 12″ dbl bevel miter saw. A high torque motor and optimized gear box make this a powerful and reliable compound sliding miter saw. 5 rpm (no load) 2500 blade arbor 1 inch, with dual flange to allow for 5/8” arbor blades maximum width of cut (90 degree miter) 11-13/16 inches maximum width of cut (45 degree miter) 8-1/4 inches maximum depth of cut (90 degree bevel) 3 inches maximum depth of cut (45 degree bevel) 1-1/2 inches.




You might be interested in these Saws…


Dake - 985017 - Horizontal Band Saw 1 PH 10 In

Dake – 985017 – Horizontal Band Saw, 1 PH, 10 In

Dake – 985017 – Horizontal Band Saw, 1 PH, 10 In - Brand new accura cylinder. Replace your worn unit or get one for a spare micro-adjustable feed rate for longer blade life and unique hold valve for easy positioning of work in your machine’s vise. 10×18 horizontal band saw. Blade width 1 blade thickness. 0 phase 1 hz 60 features vibration free cast machined table bed, heavy steel base, horizontally mounted guide arms, and adjustable blade guides and rollers table dimensions 11 x 18 blade wheels dia. 16 min. Thickness of cut 10 miter capacity 45 degrees max. Blade length 150 min. 5″ height in open position 17 3/8″ mounting holes are 10 mm, slightly larger than 3/8″ ships at 5 lbs. This is a brand new 7 x 12 hydraulic cylinder assembly from our surplus stock (we ordered them special). Technical specification item horizontal band saw cutting capacity rectangle 11 x 18 cutting capacity round 10 cutting capacity square 10 voltage 110/220 hp 1 speeds 50 to 270 fpm max.

Genesis GMCS547C 4-34 Control-Grip Metal Cutting Saw

Genesis GMCS547C 4-3/4″ Control-Grip Metal Cutting Saw,

Genesis GMCS547C 4-3/4″ Control-Grip Metal Cutting Saw, - Die-cast aluminum gear box. With its compact design no more running back to a stationary tool saving you time and money. Power through mild steel plate up to a ¼” thick, aluminum, angle iron, metal studs, tube steel, copper, conduit and more. The gmcs547c is built with the serious tradesman or metal worker in mind. Cuts mild steel, aluminum and other non ferrous metals. No need for messy cooling fluids. No sparks, no smoke or coolants needed. The genesis 4-3/4” dry cut metal saw offers power and versatility. With its heavy duty construction this tool is built too last. And a chip collection system and blade viewing area keep you on track when precision matters. The genesis dry cut meal saw control grip design fits your hand, balancing the tool for precision one handed operations.

WEN 3970 Metal-Cutting Band Saw with Stand 4 x 6

WEN 3970 Metal-Cutting Band Saw with Stand, 4″ x 6″

WEN 3970 Metal-Cutting Band Saw with Stand, 4″ x 6″ - The beveling vise provides a firm grasp on your work piece, allowing the bandsaw to create angled cuts anywhere from 0 to 60 degrees. Remember when you could cut through 24 square inch of steel in a single pass remember wen. Ball bearing blade guides provide a long lifespan and reliable operation while the auto-shut off mechanism automatically stops the bandsaw once a cut has been completed. This bandsaw includes a durable stand with a collapsible handle and two 4-inch never-flat wheels to keep your bandsaw elevated and easy to transport. Includes a stand with wheels, a pre-installed blade, a 46 amp motor and a 2-year warranty. Onboard blade tension and tilt knobs make for easy adjustments and minor tweaks in-between jobs. With three different operating speeds of 80, 120 and 200 feet per minute, achieve the perfect cut on a variety of sizes and materials. The wen 4-inch by 6-inch metal-cutting bandsaw also features a work piece stop for uniform cuts, a pre-installed 64-1/2 inch x 1/2 inch blade, a 4. Cut pipes up to 4-1/2 inch in diameter or rectangular materials up to 4 x 6 inch in size. Beveling vise helps create cuts anywhere from 0 to 60 degrees. Make 45-degree cuts up to 3-1/2 inch in diameter for circular material and 3-1/2 x 3-1/2 inch for square material.

5 x 6 Vertical Horizontal Metal Cutting Band Saw 3PHASE MOTOR 220V 12HP 4x6

5 x 6 Vertical Horizontal Metal Cutting Band Saw 3PHASE MOTOR 220V 1/2HP 4×6

5 x 6 Vertical Horizontal Metal Cutting Band Saw 3PHASE MOTOR 220V 1/2HP 4×6 - 6x1638mm -round at 90 degrees128mm(5″) -rectangle at 90degrees128mmx150mm(5″x6″) -round at 60 degrees 44mm (1. Quantity 1. 75”) -rectangle at 45 degrees 75mm x 95mm (3” x 3. Vertical / horizontal metal cutting band saw. (2) 4″ wheels includedvertical cutting table size 9-1/2” x 9-1/2”. 75” x 2. 3 phase motor 220v / 380v 1/2 hp 375 w 37 kw 195a60 hz 1680 r / min. 7”). -Blade size(mm)13×0. Overall dimension 20”l x 26”w x 41-1/2”hweight 185 lbs roughly. 75”) -rectangle at 60 degrees 44mm x 56mm (1.

Bare-Tool Milwaukee 2420-20 Bare-Tool 12-Volt Hackzall Saw Tool Only No Battery

Bare-Tool Milwaukee 2420-20 Bare-Tool 12-Volt Hackzall Saw (Tool Only, No Battery)

Bare-Tool Milwaukee 2420-20 Bare-Tool 12-Volt Hackzall Saw (Tool Only, No Battery) - 12-volt lithium-ion battery offers longer run-time and fade-free performance. Accepts both hackzall and sawzall style blades. Variable speed trigger for increased user control. The product is manufactured in china. Battery fuel gauge displays remaining run-time and built-in led light illuminates work surface. The product is durable. M12 hackzall. The product is easy to use. Keyless quik-lok blade clamp allows for quick and easy blade changes and all-metal gear case for added durability. The product is durable. The product is manufactured in china.