Freud 32-526 7-Piece Multi Rabbeting Kit 3/4″ Height Flush to 1/2″ Depth 1/2″ Shank

 

Freud 32-526 7-Piece Multi Rabbeting Kit 34 Height Flush to 12 Depth 12 Shank

Freud 32-526 7-Piece Multi Rabbeting Kit 3/4″ Height Flush to 1/2″ Depth 1/2″ Shank

Freud 32-526 7-Piece Multi Rabbeting Kit 3/4″ Height Flush to 1/2″ Depth 1/2″ Shank - Use on hand-held and table-mounted portable routers. Shear angle design produces superior finish. Wrench included. Join boards and let in back panels with different depths of cut with these rabbeting bit sets from freud with interchangeable bearings to cut rabbets of different depths, these sets produce super smooth cuts on both surfaces of the rabbet. Freu9. Cuts all composition materials including plywoods, hardwoods, and softwoods. Anti-kickback design for safety. Freud micrograin carbide for long life. Multi-axis grinding for burn free cuts.




You might consider these Joinery Bits as well…


Yonico 14188q T-Slot T-Track Slotting Router Bit 14 Shank

Yonico 14188q T-Slot & T-Track Slotting Router Bit 1/4″ Shank

Yonico 14188q T-Slot & T-Track Slotting Router Bit 1/4″ Shank - This t-track and t-slot router bit cuts slots for bolts that have a 1-1/16″ wide x 5/16″ high heads with up to 3/8″ shaft diameter. It is recommended that a straight groove, matching width to the upper part of the “t”, be cut into the work piece prior to routing the t-slot to reduce the stress on the bit. Premium quality c3 micro-grain carbide cutters with silver induction brazing for maximum strength. Satisfaction guaranteed & limited lifetime warranty. Very handy for creating jigs and clamp assemblies. This t-slot router bit cuts slots for bolts that have a 1-1/16″ wide x 5/16″ high heads with up to 3/8″ shaft diameter can also be used to make slat wall boards the shank is 1/4″ in diameter. For use in table or handheld routers. Go easy on the feed and back off every couple of inches before resuming with the cut. T-slot router bits are great for creating channels for jig and clamp applications and keyholes for hanging projects. The shank is 1/4″ in diameter. Can also be used to make slat wall boards.

MLCS 7860 Box Joint Router Bit 12inch Shank

MLCS 7860 Box Joint Router Bit 1/2inch Shank

MLCS 7860 Box Joint Router Bit 1/2inch Shank - Use in router table only. Make perfect box joints with speed and ease by using our precision carbide cutters. The long 1/2″ arbor holds 5 (5/32″) three-wing, carbide-tipped slot cutters, 4 spacers and a ball bearing guide. The bearing is designed for 1/2″ depth of cut, but make shallower cuts by adjusting your router fence. Strong, beautiful box joints are ideal for jewelry box drawers, humidors and a variety of small projects. 1/2″ shank. For stock up to 1/2″. Make perfect box joints. Use stock up to 1/2″ thick.

MLCS 8377 15-Piece Router Bit Set with Carbide-Tipped 12-Inch Shanks

MLCS 8377 15-Piece Router Bit Set with Carbide-Tipped 1/2-Inch Shanks

MLCS 8377 15-Piece Router Bit Set with Carbide-Tipped 1/2-Inch Shanks - 3. High-grade carbide blade with sharp cutting, smooth rotation, operating light. 7mm 1 x traight bit 6mm 1 x mortising bit 12. Razor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposed 2. Note the color of the item may vary slightly due to photography and your own computer features 1/2″” shank,sealed bearings,smooth accurate cuts. 48×5. Economical, all-purpose starter set. 97″” (lxwxh) size 1 x straight bit 3mm 1 x cove box bit, r6mm 1 x roman ogee, r4mm 1 x cove box bit, r3mm 1 x cove bit, r6. Wood storage box included. 7mm 1 x traight bit 12mm 1 x traight bit 16mm safety instructions 1. 7mm 1 x corner round, r9.

Silverline 763555 12-inch Tct Router Bit 12-inch 12-piece Set

Silverline 763555 1/2-inch Tct Router Bit 1/2-inch, 12-piece Set

Silverline 763555 1/2-inch Tct Router Bit 1/2-inch, 12-piece Set - 7×12. High quality 1/2″ hardened steel shanks with sharp tct cutting edges. 7xr6. 7×12. 7mm chamfer bit 12. 7×16 mm v-groove bit 12. 5mm rounding box bit 12. 7xr4mm. Tct cutting edges and strong, hardened steel shanks. Includes straight 6 x 20mm, 12 x 20mm, 16 x 20mm 90 grooving d127mm dovetail d127mm 45 chamfer d32mm bearing flush trim 127 x 13mm rounding over r63mm d222mm, r95 d286mm cove box r63 d127mm cove r63 d222mm roman ogee r4 d255mm. 7xr6.

Silverline 14 TCT Router Bit Set 24pce

Silverline 1/4″ TCT Router Bit Set 24pce

Silverline 1/4″ TCT Router Bit Set 24pce - 7mm. 35/d28. 35/d25. 5/d31. 5 and 12. Dovetail 9. Hex key. 5, 12. 8mm. Flush trim 12. Rounding over r3.




Do you need these Router Bits as well?


Freud 20-112 1-Inch Diameter 90-Degree V-Grooving Router Bit with 12-Inch Shank

Freud 20-112 1-Inch Diameter 90-Degree V-Grooving Router Bit with 1/2-Inch Shank

Freud 20-112 1-Inch Diameter 90-Degree V-Grooving Router Bit with 1/2-Inch Shank - Freud 1 in. Kickback reducing design. Covered by freud’s limited lifetime warranty. (Dia. Precision ground for the smoothest cuts. ) V groov. Individually computer balanced.

MAGBIT 6249007 MAG624 38-Inch Hex Arbor

MAGBIT 624.9007 MAG624 3/8-Inch Hex Arbor

MAGBIT 624.9007 MAG624 3/8-Inch Hex Arbor - 1/2-inch-20 thread, fits saws up to 1-3/16-inch. The smarthub works with up to ten (10) compatible acurite sensors (sold separately) to track indoor temperature, outdoor temperature, indoor humidity, outdoor humidity, wind, rain, atmospheric pressure, the weather forecast and more. Com website, or easily publish your weather reports on weather underground. The smarthub reports your acurite sensor data over the internet, for remote monitoring of indoor and/or outdoor environmental conditions for any location or multiple locations. 3/8-inch hex. Monitor conditions remotely. One-year limited warranty. View your environmental data from virtually anywhere on a smartphone, tablet or computer with the my acurite app or myacurite. It’s more than accurate, it’s acurite. Customize and automate email and text alerts to get notified when conditions change or your presets are reached.

Freud 18-130 1-14-Inch Diameter Round Nose Router Bit with 12-Inch Shank

Freud 18-130 1-1/4-Inch Diameter Round Nose Router Bit with 1/2-Inch Shank

Freud 18-130 1-1/4-Inch Diameter Round Nose Router Bit with 1/2-Inch Shank - Kickback reducing design. Covered by freud’s limited lifetime warranty. Precision ground for the smoothest cuts. Freud 5/8 in. Individually computer balanced. Radius round.

EnPointâ„¢ Round Grooving Carbide-Tipped 2 Flutes Radius Core Box Router Bit 12 Shank 113 Cut Diameter 07 Cut Height Woodwroking Industrial Quality Long Reach CNC Round Nose Router Bit

EnPointâ„¢ Round Grooving Carbide-Tipped 2 Flutes Radius Core Box Router Bit 1/2″ Shank 1.13″ Cut Diameter 0.7″ Cut Height Woodwroking Industrial Quality Long Reach CNC Round Nose Router Bit

EnPointâ„¢ Round Grooving Carbide-Tipped 2 Flutes Radius Core Box Router Bit 1/2″ Shank 1.13″ Cut Diameter 0.7″ Cut Height Woodwroking Industrial Quality Long Reach CNC Round Nose Router Bit - Package pack of 1 note the metric sizes were relatively accurate. 6mm) cutter height 0. 7 inch (17. 2. Specifications bit type round nose bit shank diameter 1/2 inch (12. This fluting cutter cuts half-round grooves for decorative columns, finger pulls, sill drip nails. Commonly used for sign-making, and are also ideal for fluted columns, millwork, finger pulls, drain grooves on cutting boards, drip rails for window sills and more. Can cut rounded grooves and slots perfectly for a variety of materials from wood panels, flakeboard, plywood, mdf and other wood composites sheet materials can also be used in all handled and table mounted routers. 13 inches (28. 7mm) cutter diameter 1. Designed for cutting laminate, mdf, veneered plywood, wood panels.

Yonico 12343 Round Over Rail and Stile with Cove Panel Raiser 3 Bit Router Bit Set 12-Inch Shank

Yonico 12343 Round Over Rail and Stile with Cove Panel Raiser 3 Bit Router Bit Set 1/2-Inch Shank

Yonico 12343 Round Over Rail and Stile with Cove Panel Raiser 3 Bit Router Bit Set 1/2-Inch Shank - Build-up and heat resistant teflon coating. Solid hardened steel bodies with anti-kickback design. C3 micro-grain tungsten carbide cutters. Build-up & heat resistant teflon coating. Satisfaction guaranteed and lifetime warranty. Satisfaction guaranteed & lifetime warranty. Industrial quality router bits. • Industrial quality • c3 carbide cutters • solid hardened steel body • anti-kickback design • build-up resistant coating • 1/2″ shank.